Specification and sample coordinationVerified contact supplied after inquiry routing

Repreve material note

The Repreve Swimwear Batch I Rejected—and What It Taught Me About Fiber Specs

2026-09-29 · Mireille Fontaine

When a sustainable swimwear order almost missed its launch

In February 2024, I was standing in our receiving bay with a clipboard and a growing headache. We had a swimwear launch for a mid-size brand, and the fabric on the table was supposed to be Repreve swimwear fabric—a recycled polyester blend with the right stretch, chlorine resistance, and hand feel. The client wanted a story they could tell: recycled content, performance, no greenwashing. My job was to make sure the story survived contact with the actual goods.

I'm the quality and brand compliance manager at a textile company. I review every fabric lot before it reaches customers—roughly 200+ lots a year. Over four years of reviewing deliverables, I've rejected about 18% of first deliveries in a typical Q1. That's not because suppliers are careless. It's because specifications get translated, lost, or argued about.

This order had three fiber stories: Repreve polyester fabric for the main swimsuit, cotton yarn for a terry cover-up, and viscose fiber for a soft lining. Each had its own spec sheet. Each had its own way to go wrong.

The spec sheet vs. the real fabric

We started with Repreve. According to Repreve (repreve.com), the fiber is made from recycled plastic bottles and verified through third-party certification. That's useful for brand claims. But recycled content alone doesn't make a swimwear fabric. For Repreve swimwear fabric, we needed to lock down:

  • Fiber blend: Repreve recycled polyester with spandex or PBT for stretch.
  • Fabric weight: 180–220 gsm, depending on the suit style.
  • Stretch and recovery: elongation at break, modulus, and recovery after 5 cycles.
  • Chlorine resistance: a mill test, not a promise. Pool exposure matters.
  • Colorfastness: to chlorine, perspiration, and light.
  • Pilling and snag resistance: especially for high-visibility prints.

We wrote those into the contract. The mill signed off. The first shipment arrived in March 2024. The fabric looked right. The hand feel was close. Then we ran the stretch recovery test. It was off by 7% against our spec. Normal tolerance was ±3%. The vendor said it was 'within industry standard.' I went back and forth between accepting a deviation and rejecting 6,000 meters. On paper, a 7% miss sounds small. In a swimsuit, it means the suit grows and sags after two wears. We rejected the batch. They redid it at their cost.

That was the moment I stopped treating Repreve as a drop-in replacement. Recycled polyester is still polyester. It has to meet the same performance specs as any other fiber. The sustainability claim doesn't lower the quality bar.

Cotton yarn specifications: the quiet failure

While the swimwear fabric was being redone, the cotton cover-up yarn became a problem. We had specified Ne 30/1 combed cotton for a terry cloth. The supplier sent Ne 30/1 carded. The invoice said 'same count.' The difference showed up on the loom: more neps, more breaks, and a rougher hand.

If you're sourcing cotton yarn, don't stop at count. Cotton yarn specifications should include:

  • Yarn count: Ne 30/1, Ne 20/1, etc.
  • Twist: TPI or TPM, and twist direction.
  • Tenacity: cN/tex, both dry and conditioned.
  • Elongation at break: %.
  • Unevenness: CVm% and IPI values.
  • Contamination: seed coat fragments, foreign fibers.
  • Wax content and moisture regain.
  • Certifications: cotton origin, organic claims, traceability.

We caught the carded/combed swap before cutting. It still cost us three days. The same issue had happened in Q3 2023 with a different vendor. You'd think written specs would prevent it, but interpretation varies wildly. Now we require a signed pre-production sample and a lot-specific test report.

Viscose fiber specifications and the wholesale cost trap

The lining was viscose. That's where the cost pressure got real. Viscose fiber wholesale cost guides can be misleading because they quote a single price per kilogram. But viscose isn't one thing. Denier, cut length, tenacity, and origin change the price and the performance.

For our lining, the viscose fiber specifications were:

  • Denier: 1.2D.
  • Cut length: 38mm.
  • Tenacity: dry 2.2–2.6 cN/tex.
  • Elongation: 18–22%.
  • Oil content: ≤0.3%.
  • Moisture regain: 11–13%.
  • Whiteness: agreed delta E under specified light source.
  • Certification: FSC or other chain-of-custody if claiming responsible sourcing.

I'm not a pulp chemist, so I can't speak to the dissolving pulp process or chemical recovery rates. What I can tell you from a compliance perspective is that the spec sheet is your only defense against a cost-driven substitution.

On price: I don't have hard data on global viscose staple fiber pricing. Based on our Q4 2024 RFQs, standard 1.2D x 38mm viscose from Asian suppliers quoted between $1.45 and $1.85 per kg FOB, depending on volume, certification, and payment terms. Specialty variants and European origins were higher. That's not a market index—just our experience. Verify current pricing before you budget. As of January 2025, freight and energy costs are still moving rates.

We went with a mid-priced supplier because the low-cost option had inconsistent oil content. The failures cost more than the savings.

The result: a revised protocol, not a perfect launch

We ended up shipping the swimwear line two weeks late. Not ideal. But we avoided a recall. The Repreve swimwear fabric passed the second round. The cotton yarn was replaced with combed cotton. The viscose lining met spec after we tightened the incoming inspection.

We also changed our supplier verification protocol. Now every fiber lot—Repreve polyester fabric, cotton yarn, viscose fiber—gets:

  1. A signed golden sample.
  2. A lot-specific test report from the mill.
  3. Our own blind verification on key specs.
  4. A deviation clause with financial responsibility.
  5. A pre-shipment review before the bulk runs.

That protocol added about 4% to our quality budget. It saved us an estimated $22,000 in redo costs in the first year. I wish I had tracked the exact defect rate more carefully, but anecdotally, first-delivery rejections dropped from 18% to 9%.

What I'd tell another quality manager

Here's the thing: sustainable fibers are not a marketing layer you add after the spec sheet. They are the spec sheet. Repreve can be part of a strong swimwear fabric, but only if you define stretch, recovery, chlorine resistance, and colorfastness. Cotton yarn specifications are boring until they ruin a dye lot. Viscose fiber wholesale cost guides are useful only when you compare the same denier, length, and certification.

What was best practice in 2020 may not apply in 2025. The fundamentals haven't changed—define the spec, verify the lot, document the deviation—but the execution has transformed. More recycled content, more traceability claims, more pressure to cut cost. You can't manage that with a handshake and a price per kilo.

So the next time a supplier says 'within industry standard,' ask for the actual number. Then ask for it in writing. That's the only way the story on the hangtag matches the story in the warehouse.

Mireille Fontaine
Mireille Fontaine

Mireille Fontaine is a textile quality, compliance, and sourcing analyst covering apparel fabrics, interior textiles, performance materials, coated fabrics, nonwovens, fibres, recycled-content claims, chemical restrictions, and mill production terms. She uses ISO 14040 and ISO 14044 life-cycle boundaries alongside lot-based inspection data while comparing declared composition, restricted-substance evidence, chain of custody, colour difference, defect rate, MOQ, sampling lead time, yield loss, and replacement risk. Her procurement guides help brands, importers, and manufacturers compare supplier claims, test-report scope, bulk tolerances, traceability, environmental disclosures, and total delivered value.