Specification and sample coordinationVerified contact supplied after inquiry routing

Repreve material note

Repreve vs. Lyocell for OEM Fabrics: Swimwear, Breathability, and the Spec Sheet Reality

2026-09-08 · Lucia Bianchi

In March 2024, a client called at 4:30 p.m. with a question I hear every season: “Can we swap the Repreve swimwear fabric to lyocell? It’s more breathable and more sustainable.” They had a private-label sample shoot in ten days. In my role coordinating custom fiber and fabric supply for OEM programs, I’ve handled 200+ rush orders over the last seven years, and I know this question is not about adjectives. It is about whether the fabric will survive the garment’s real use and whether the supplier can commit to a date.

So let’s compare Repreve recycled polyester and lyocell the way I would compare two options on a rush order: moisture management, durability in wet conditions, certification evidence, and OEM lead time. Here is the comparison framework I use:

  • Moisture management and breathability
  • Wet strength and swimwear performance
  • Sustainability claims and certificates
  • OEM sourcing and delivery certainty

Moisture Management and Breathability: Repreve Polyester vs. Lyocell

Start with the fiber specifications. Lyocell is a cellulosic fiber made from wood pulp. Commercial spec sheets as of January 2025 commonly list lyocell moisture regain around 11.5%, while standard polyester sits near 0.4%. That single number drives a lot of product perception: lyocell feels less plasticky, absorbs perspiration, and often feels cool when first put on. Repreve polyester has low moisture absorption, so moisture moves through the yarn surface and the fabric structure by wicking.

But wetness is the dividing line. If you are writing a breathable fabric specification guide, define “breathable” with a test method. For air flow, use air permeability (ASTM D737). For vapor transport, use moisture vapor transmission rate (ASTM E96 or ISO 11092). A very open Repreve mesh can be extremely air-permeable, while a tightly woven lyocell poplin cannot match it just because it is cellulosic. Fabric geometry matters as much as fiber choice.

The counterintuitive part is that in a wet test, lyocell’s high absorbency can work against it. It absorbs water into the fiber. That moisture stays. A hydrophobic Repreve polyester fabric will not hold much water, so it dries faster and does not feel heavy after swimming or heavy sweating. That’s what “breathable” should mean for a performance product.

So when a product manager calls Repreve swim fabric “hot” and lyocell “breathable,” I ask a practical question: Which test, at what fabric weight, against which design? The answer is usually from a marketing brochure, not a lab report.

Wet Durability and Swimwear Performance

If you are sourcing Repreve swimwear fabric for bikinis, swim briefs, shapewear, or board shorts, the first problem is what happens after chlorine, sunscreen, salt water, and repeated stretch. This is where recycled polyester performs well. Repreve is a family of recycled yarns made from PET bottles and post-industrial waste. The yarn itself is still polyester: strong, low-water-absorbing, and dimensionally stable when wet. A Repreve polyester fabric is often a knit with four-way stretch; when elastane is included, the fabric must protect that stretch recovery and survive pool chemicals. Polyester gives you the right starting point.

Lyocell is not a bad swimwear fiber because it is “natural.” It is the wrong primary fiber for swimwear because it absorbs water, gains weight, can swell, and has more difficulty snapping back to shape than a hydrophobic synthetic yarn. For any lyocell fiber specifications you receive, compare dry and wet tenacity. A drop in wet strength is a warning sign for a garment that will be wet and stretched again and again. Polyester is far less water-sensitive, which explains why swimwear spec sheets often lead with polyester rather than cellulosic fiber.

Run a hand-sample test before committing. Wash it 20 times, soak it in pool-strength chlorine water, and stretch it repeatedly. Then look at stretch loss, pilling, color change, and fabric weight. No fiber choice replaces that test.

Sustainability Claims and the Evidence That Matters

Both fibers can be part of a responsible program, but neither should be selected on the word “green” alone.

If a supplier offers Repreve swimwear fabric, ask for the Global Recycled Standard (GRS) chain-of-custody certificate for the yarn, and put the recycled-content percentage on your purchase order. Repreve recycled content is verified at the fiber level, but an effective spec ties that claim to a batch. A factory should show you documents, not a landing page.

Lyocell’s main advantage is a closed-loop solvent recovery process and, with credible sourcing, a renewable raw material. Ask the mill for certification of the wood source and the lyocell producer’s chain-of-custody documents. “Wood-based” alone does not prove responsible forestry.

I still kick myself for accepting a verbal “recycled” claim from a yarn broker years ago. The certificate never arrived. That mistake cost my client an entire sustainability report submission. Now I ask for the document before I issue a purchase order, no exceptions.

OEM Sourcing and the Price of Certainty

Here is where the emergency-specialist side of my job kicks in: fiber choice is also a delivery decision.

Custom polyester yarn OEM programs allow you to specify denier, filament count, twist, dye method, and recycled content. Repreve yarns are sold through a mature network of fiber suppliers and mills, so a mill often has existing yarn counts, certifications, and dye queues that can be matched faster. Lyocell is usually a staple fiber; if you are spinning it or waiting for specialty yarn, lead times and MOQs behave differently. It’s not inherently better or worse, but it has to be planned earlier.

For an urgent order, timing is not a soft factor. I once told a vendor that a production date was non-negotiable. They heard, “we should try.” Discovered this when the order shipped three days after the deadline, which turned a sixteen-week project into a miss. Since then, I ask for a contract date and do not accept “probably.”

An expedite fee is not a penalty for being late. It is the price of transferring the risk of lateness to the supplier. In March 2024, we paid a 20% rush fee for Repreve swim fabric that had already passed wet testing. A cheaper supplier said, “around two to three weeks.” The paid rush option arrived in five days. If it had missed the sample shoot, the cost would have been roughly twelve times that fee.

That is why our team now builds a 48-hour buffer into every fabric approval that feeds a photo shoot or a retailer deadline. It seems inefficient until the first launch delay.

So Which Should You Specify?

Choose Repreve polyester when the garment will be wet, stretched, and washed repeatedly—swimwear, board shorts, performance leggings, training tops. Also choose it when you need a verifiable recycled-content claim or when you are working through an existing polyester yarn OEM supply chain that can meet the date.

Choose lyocell when the garment lives in dry or light-moisture environments, and natural softness and absorbency are genuine assets—shirts, dresses, sleepwear, lightweight knitwear. Make sure you have enough lead time to compare fabrics and verify wet-and-dry performance, not just the hand feel.

If you want a blend, test it. Repreve polyester can be blended with lyocell in spun yarns to combine recycled content with natural softness. But for swimwear, keep lyocell out of the primary swim layer unless a real wet test tells you otherwise.

When I am triaging a rush order, I don’t search for the perfect “best” fiber. I search for a fabric that survives the actual use, has certificates that match the label, and can be delivered on a date that is signed rather than guessed. Answer those three questions first, and the Repreve-vs-lyocell choice becomes much easier.

Lucia Bianchi
Lucia Bianchi

Lucia Bianchi is a woven apparel-fabric analyst covering cotton, linen, wool, rayon, denim, shirting, twill, satin, poplin, and blended garment fabrics. She applies the ISO 1833 series for fibre composition and ISO 105-C06 for laundering colourfastness while checking GSM, yarn count, usable width, shrinkage, skew, shade grade, drape, and surface defects. Her specification guides help designers, sourcing teams, and mills align fibre claims, lab dips, bulk tolerances, care conditions, and garment performance before production approval.